|
| |
The Wright Band Saw Guide
 | Prolongs Life of Band Saw |
| Frictionless, Free-running |
| Simple to Lubricate |
| Meets all Saw Requirements |
Standard equipment on many industrial band saws today, the Wright Guide
protects and extends the life of your saw blades. Virtually frictionless for
maximum protection to saw blade, the guide uses replaceable, hardened steel
jaws*, is dustless and simple to lubricate. The guide
is available in 4 sizes to meet all
industrial band saw specifications.
NEW! Tungsten Carbide Jaws now available for extra long life.
|
Guide No |
Description |
Ball Bearing
Wheel Shank Shank
O.D. Dia
Length |
Mounting Stud
|
Complete Guides
|
Jaws Only
|
Wheels Only
|
|
#00 |
Special Guide for small machines. For
saws 1/8" to
1/2" sizes |
13/4" 3/8"
—--- |
———
|
$65.00 |
$22.00
|
|
|
#0 |
Lower Guide for saws 1/8" to
11/4". Also upper guide for small machines |
115/16"
3/4" 13/4" |
3/4" x 3"
3/4" x 6"
|
$125.00 |
$36.00
|
$37.00 |
|
#1 |
For saws 1/8" to 11/2" |
27/8"
3/4" 2" |
3/4" x 6" |
$150.00 |
$36.00 |
$47.00 |
|
#2 |
For saws 1/8" to 21/2" |
Use No. 1 Wheel |
3/4" x 6" |
$175.00 |
$40.00 |
$20.50 |
|
#2 |
For saws 1/4" to 21/2" |
Not Available |
3/4" x 6" |
$175.00 |
$40.00 |
$20.50 |
Model No. 20 Supports
Blades 1/4" to 1 3/4" wide.
|
Groove in thrust wheel holds back of blade |
 |
Two wheels below hold sides of blade |
|
Upper Model NO. 20 Designed to be used above table |
|
| Guide Wheels Only $36.00
|
 |
Lower Model No. 20 shown here is supplied with universal attachments; can be
mounted either from the top or bottom; makes it easy to install in close
places below table |
|
Lower Model No. 20 Designed to be used below table |
|
PROGRESS BANDSAW GUIDE
 |
Upper $175.00
Lower $150.00
Steel Jaws $36.00
Carbide Tipped Jaws $75.0
|
 |
|
Recommended for use on band saw machines in production work running at any
speed and the cutting of all kinds of materials. |
|
Can be installed on machines having 21/2" back of blade to guide post,
and back of the blade below the table. |
Progress Bandsaw Guide
The only guide that has four wearing surfaces on the Jaws. The
only guide that does not have to be removed from the machine when jaws are to be
replaced or refitted. When one of four corners of jaws are worn, true up on
emery wheel, and replace.
Usually takes over an hour to refit jaws on old style roller
guide. PROGRESS Guide Jaws are changed in a minute.
Guide Conversion Kits
|
SAW MODEL |
KIT NUMBER |
PRICE |
|
Centaro Classic 900 (36") |
CC36 |
$273.00 |
|
Centaro 800(32"), 700(28") |
CC32, CC28 |
$246.00 |
|
Centaro 600(24") |
CC24 |
$210.00 |
|
Centaro 500 (20"), 350 (14") |
CC20, CC14 |
$179.00 |
|
Davis & Wells - 20" |
DW20 |
$165.00 |
|
Delta -14" |
DEL14 |
$149.00 |
|
Delta -14" Hex Post |
DEL14HEX |
$169.00 |
|
Delta - 20" |
DEL20 |
$149.00 |
|
Delta -20" Older Style |
DEL20OLD |
$185.00 |
|
General 15" |
GEN15 |
$169.00 |
|
Grizzly - 16" |
GRI16 |
$129.00 |
|
Grizzly 16" New |
GRI16NEW |
$149.00 |
|
Grizzly -18" |
GRI18 |
$139.00 |
|
GROB NS 18" - 24" |
NS500 |
$180.00 |
|
GROB HS 24" |
NS500 |
$180.00 |
|
GROB 4V 18" - 24" |
4V500 |
$190.00 |
|
Jet 14" |
JET14 |
$149.00 |
|
Jet 18" |
JET18 |
$195.00 |
|
Jet 20" |
JET20 |
$195.00 |
|
Meber 500 (20") |
MEB20 |
$249.00 |
|
Meber 600 (24") |
MEB24 |
$317.00 |
GUIDE PARTS
Carter Micro-Precision Guide Parts
When ordering, identify Micro-Precision Guide Model followed by part number.
For Example: CP10-10A — Tefloy Support Blocks for CP10 Guide
CP 30-4 — Housing for CP 30 Guide... etc.
|
Part No. |
Name |
CP10 |
CP20 |
CP30 |
 |
|
4 |
Housing |
$35.00 |
$26.00 |
$22.00 |
|
1
2
5 |
Front Bracket Rear
Bracket Yoke |
35.00 |
26.00 |
22.00 |
|
3 |
Bracket Adjusting Screw |
3.75 |
3.25 |
2.75 |
|
10A |
Tefloy Support Blocks (pr.) |
16.00 |
15.00 |
13.00 |
|
|
10C |
Carboloy Support Blocks (pr.) |
81.00 |
74.00 |
68.00 |
|
|
17 |
Templet Pin blocks (pr.) |
36.00 |
33.00 |
19.00 |
|
|
24 |
Carter Ball Bearing Wheel |
45.00 |
38.00 |
27.00 |
|
|
24TCT |
Carter Ball Bearing Wheel Tungs. Carb |
76.00 |
69.00 |
49.00 |
|
Carter Guidall
Guidall "400" Parts
|
Part No. |
Name |
Price |
 |
|
401 |
Guide Body |
$106 |
|
402 |
Guide Body & Offset Bracket |
$149 |
|
404 |
Ball Bearing |
$12 |
|
405 |
Thrust Wheel |
$20 |
|
|
405 TCT |
Thrust Wheel Tungsten Carbide |
$62 |
|
|
407 |
Thrust Wheel Assembly |
$45 |
|
|
407 TCT |
Thrust Wheel Assy. Tung. Carbide |
$87 |
|
|
418 |
Support Wheel Assembly STD |
$41 |
|
|
428 |
Support Wheel Assembly "X" Wide |
$49 |
|
|
432 |
Support Block Holder (Pr.) |
$62 |
|
|
435-A |
Support Blocks (Pr.) |
$36 |
SUPPORT BLOCK ASSEMBLY #438 or #439
For Guidall 400 & 600 Support Block Models
|
|
435-C |
Carboly Support Blocks (Pr.) |
$106 |
|
|
438 |
Support block Assembly SDT (Pr.) |
$98 |
|
|
439 |
Support Block Assy. "X" Wide (Pr.) |
$134 |
|
Guidall "500" Parts
|
Part No. |
Name |
Price |
 |
|
501 |
Guide Body |
$36.00 |
|
502 |
Guide Body & Offset Bracket |
60.00 |
|
504 |
Support Wheel |
12.50 |
|
505 |
Support Stud |
4.50 |
|
|
507 |
Thrust Wheel |
15.50 |
|
|
508 |
Thrust Stud |
7.00 |
|
Guidall"600" Parts
|
Part No. |
Name |
Price |
 |
|
601 |
Guide Body |
$72.00 |
|
602 |
Guide Body & Offset Bracket |
104.00 |
|
604 |
Ball Bearing |
18.00 |
|
605 |
Support Stud |
6.50 |
|
|
607 |
Thrust Wheel |
27.00 |
|
|
607
TCT |
Thrust Wheel Tung. Carbide |
69.00 |
|
|
608 |
Thrust Stud |
12.50 |
|
|
