|
|
Side view for right hand rotation. HOW TO ORDER In ordering specify: (A) Figure Number; (B) Diameter of rosette to be cut; (C) Thickness of rosette to be cut; (D) Diameter of shank. unless otherwise specified cutters will be furnished with two cutting edges, shank 1/2" diameter. ** PRICES SUBJECT TO CHANGE WITHOUT NOTICE ** Button Rosette Cutters Provided with spurs to cut rosette free from stock. Depth of cut is made close enough to back of stock to permit resawing to release buttons. Made of high speed steel exclusively, with clearance accurately ground. No burning or tearing of stock. The profiles shown below will furnish designers with typical suggestions. Cutters may also be made to your own sketch or sample.
Side view for right hand rotation Examples Shown Above Examples Shown Above
HOW TO ORDER
In ordering specify: (A) Figure Number; (B) Large diameter of cutting edge; (C) Depth of cut; (D) Diameter of shank. Unless otherwise specified cutters will be furnished with two cutting edges, shank 1/2" diameter by 1-1/2" long. ** PRICES SUBJECT TO CHANGE WITHOUT NOTICE **
Inlay Rosette Cutters Inlay Rosette Cutters are make without spurs for producing inlay designs. Made of WTW high speed steel properly heat treated in electrically controlled furnaces, they will give maximum service, and may be used over and over without resharpening. Cutters furnished to your own sketch or sample. Pricing
**LARGER CUSTOM DIAMETERS AVAILABLE**
|
Contact InformationIf you have any questions or comments please feel free to contact one of our representatives Toll-Free or by E-Mail. Place orders by Phone, E-Mail, or Fax.
Send mail to
wtwchgo@wtwchgo.com with questions or comments about this web site.
|
