Screw Shank Dowel Drills

Home Up

Pic 1

These drills feature outlining spurs and brad point.  They are the most commonly used drills for dowel hole boring. Made of the finest carbon tool steel, they are heat treated and precision ground to exacting standards.

Overall lengths are held to very close tolerances in both left and right hand tools to ensure uniform drilling in multiple boring operations. Round shoulder has pin hole for easy removal from machines.

All dimensions are in inches. All prices are List. Some discounts and specials may apply. Contact one of our representatives for more details.

Carbon Steel Screw Shank Dowel Drills        (No.203)
Prod. # Dia. Twist
Length		 Overall
Length		 Rotation
Direction		 Price
62000 3/8 2 3 1/2 R $11.75
62001 7/16 2 3 1/2 R 11.75
62002 3/8 2 3 1/2 L 11.75
62003 7/16 2 3 1/2 L 11.75
62004 1/8 3 4 1/2 R 11.75
62005 3/16 3 4 1/2 R 11.75
62006 7/32 3 4 1/2 R 11.75
62007 1/4 3 4 1/2 R 11.75
62008 9/32 3 4 1/2 R 11.75
62009 5/16 3 4 1/2 R 11.75
62010 11/32 3 4 1/2 R 11.75
62011 3/8 3 4 1/2 R 11.75
62012 25/64 3 4 1/2 R 12.18
62013 13/32 3 4 1/2 R 12.88
62014 7/16 3 4 1/2 R 11.75
62015 29/64 3 4 1/2 R 12.18
62016 1/2 3 4 1/2 R 11.75
62017 9/16 3 4 1/2 R 15.91
62018 5/8 3 4 1/2 R 16.83
62019 3/4 3 4 1/2 R 21.65
62020 7/8 3 4 1/2 R 28.19
62021 1 3 4 1/2 R 28.19
62022 1/8 3 4 1/2 L 11.75
62023 3/16 3 4 1/2 L 11.75
62024 7/32 3 4 1/2 L 11.75
62025 1/4 3 4 1/2 L 11.75
62026 5/16 3 4 1/2 L 11.75
62027 11/32 3 4 1/2 L 11.75
62028 3/8 3 4 1/2 L 11.75
62029 7/16 3 4 1/2 L 11.75
62030 1/2 3 4 1/2 L 11.75

 

 

Designed for use in J.S. Richardson Boring Machines, but can also be used in Root, Bell, Greenlee and other machines using threaded spindles. Short length reduces run-out at tip of bit.

Super Wear™ Steel Screw Shank Dowel Drills (No. X203J)

Prod. # Dia. Twist
Length		 Overall
Length		 Rotation
Direction		 Price
62084 1/8 1 1/2 2 3/4 R $19.86
62085 3/16 1 1/2 2 3/4 R 19.86
62086 7/32 1 1/2 2 3/4 R 19.86
62087 1/4 1 1/2 2 3/4 R 19.86
62088 5/16 1 1/2 2 3/4 R 19.86
62089 3/8 1 1/2 2 3/4 R 19.86
62090 7/16 1 1/2 2 3/4 R 19.86
62091 1/2 1 1/2 2 3/4 R 19.86
62092 1/4 1 1/2 2 3/4 L 19.86
62093 3/8 1 1/2 2 3/4 L 19.86
62094 7/16 1 1/2 2 3/4 L 19.86

 

 

PIC 2

Designed exactly like the No. 203 except made of Super Wear Steel. This steel requires less frequent sharpening to maintain maximum production. The threaded shanks are treated specially for greater reliability.

Super Wear™ Steel Screw Shank Dowel Drills (No. X203)
Prod. # Dia. Twist
Length		 Overall
Length		 Rotation
Direction		 Price
62031 1/4 2 3 1/2 R $19.86
62032 5/16 2 3 1/2 R $19.86
62033 3/8 2 3 1/2 R $19.86
62034 7/16 2 3 1/2 R $19.86
62035 1/2 2 3 1/2 R $19.86
62036 1/4 2 3 1/2 L $19.86
62037 5/16 2 3 1/2 L $19.86
62038 3/8 2 3 1/2 L $19.86
62039 7/16 2 3 1/2 L $19.86
62040 1/2 2 3 1/2 L $19.86
62041 3/16 3 4 1/2 R $19.86
62042 1/4 3 4 1/2 R $19.86
62043 9/32 3 4 1/2 R $19.86
62044 5/16 3 4 1/2 R $19.86
62045 11/32 3 4 1/2 R $22.76
62046 3/8 3 4 1/2 R $19.86
62047 25/64 3 4 1/2 R $22.76
62048 7/16 3 4 1/2 R $19.86
62049 29/64 3 4 1/2 R $22.76
62050 1/2 3 4 1/2 R $19.86
62051 9/16 3 4 1/2 R $29.58
62052 5/8 3 4 1/2 R $33.15
62053 3/4 3 4 1/2 R $45.15
62054 7/8 3 4 1/2 R $59.62
62055 1 3 4 1/2 R $61.65
62056 3/16 3 4 1/2 L $19.86
62057 1/4 3 4 1/2 L $19.86
62058 9/32 3 4 1/2 L $19.86
62059 5/16 3 4 1/2 L $19.86
62060 11/32 3 4 1/2 L $22.76
62061 3/8 3 4 1/2 L $19.86
62062 25/64 3 4 1/2 L $22.76
62063 7/16 3 4 1/2 L $19.86
62064 29/64 3 4 1/2 L $22.76
62065 1/2 3 4 1/2 L $19.86
62066 9/16 3 4 1/2 L $29.58
62067 5/8 3 4 1/2 L $33.15
62068 3/4 3 4 1/2 L $45.15
62069 1 3 4 1/2 L $61.65
 

Pic 3

A double-twist bit with extension lip. Round shoulder has pin hole for quick removal of the bit.  Not recommended for power fed equipment. Use style 203 drills for power equipment.

Screw Shank Dowel Bits (No. 164)
Prod. # Dia. Shank
Threads		 Overall
Length		 Price
62719 1/4 7/16-14 4 1/2 $37.95
62720 5/16 7/16-14 4 1/2 37.95
62721 3/8 7/16-14 4 1/2 37.95
62722 25/64 7/16-14 4 1/2 37.95
62723 7/16 7/16-14 4 1/2 37.95
62724 29/64 7/16-14 4 1/2 37.95
62725 1/2 7/16-14 4 1/2 37.95

Pic. 4  

Designed primarily for the Bell 24 Double End Miter and Boring Machine.  These tools can be used on any other boring machine where "Run-Out" has become a problem.  The extended shaft insures rigidity especially on small diameter tools. 

Super Wear™ Steel Screw Shank Dowel Drills (No. X203B)
Prod. # Dia. Twist
Length		 Overall
Length		 Rotation
Direction		 Price
62070 3/16 1 3/4 4 1/2 R $19.86
62071 1/4 1 3/4 4 1/2 R 19.86
62072 5/16 1 3/4 4 1/2 R 19.86
62073 3/8 1 3/4 4 1/2 R 19.86
62074 25/64 1 3/4 4 1/2 R 22.76
62075 7/16 1 3/4 4 1/2 R 19.86
62076 1/2 1 3/4 4 1/2 R 19.86
62077 3/16 1 3/4 4 1/2 L 19.86
62078 1/4 1 3/4 4 1/2 L 19.86
62079 5/16 1 3/4 4 1/2 L 19.86
62080 3/8 1 3/4 4 1/2 L 19.86
62081 25/64 1 3/4 4 1/2 L 22.76
62082 7/16 1 3/4 4 1/2 L 19.86
62083 1/2 1 3/4 4 1/2 L 19.86

 

These carbide-tipped drills were developed especially for use in plastics, laminated products, and chip core. Also excellent in fine-grained hard-woods such as maple and pecan.

Carbide-Tipped Screw Shank Dowel Drills (No. 203CT)
Prod. # Dia. Twist
Length		 Overall
Length		 Rotation
Direction		 Price
62099 1/4 2 3  1/2 Right $45.63
62100 5/16 2 3  1/2 Right 45.63
62101 3/8 2 3  1/2 Right 45.63
62102 7/16 2 3  1/2 Right 47.92
62103 1/4 3 4  1/2 Right 45.63
62104 5/16 3 4  1/2 Right 45.63
62105 3/8 3 4  1/2 Right 45.63
62106 25/64 3 4  1/2 Right 47.13
62107 7/16 3 4  1/2 Right 47.92
62108 1/2 3 4  1/2 Right 58.51
62109 1/4 3 4  1/2 Left 45.63
62110 5/16 3 4  1/2 Left 45.63
62111 3/8 3 4  1/2 Left 45.63
62112 25/64 3 4  1/2 Left 47.13
62113 7/16 3 4  1/2 Left 47.92
62114 1/2 3 4  1/2 Left 58.51
62528 6MM 3 4  1/2 Right 49.41
62530 8MM 3 4  1/2 Right 49.41
62532 10MM 3 4  1/2 Right 54.25
62529 6MM 3 4  1/2 Left 49.41
62531 8MM 3 4  1/2 Left 49.41
62533 10MM 3 4  1/2 Left 54.25
 

Taper Head drill point accurately ground to insure fast smooth boring.  The shanks of all tools are relatively soft to facilitate removal from chuck in event of breakage.  Used where exit holes must be clean.

 

Super Wear™ Steel Screw Shank Dowel Drills (No. X204)

Prod. # Dia. Twist
Length		 Overall
Length		 Rotation
Direction		 Price
62095 3/8 3 4  1/2  Right $19.86
62096 7/16 3 4  1/2 Right 19.86
62097 3/8